Payment
PAYMENT IS ACCEPTED VIA PAYPAL, DEBIT/CREDIT CARD
OR CALL US AND PAY VIA TELEPHONE
OR CALL US AND PAY VIA TELEPHONE
from 9 to 5
gibidi@gibidimotors.co.uk
Gibidi Floor 884 BAC 24V 180°
£ 710.00
Only 5 remaining
£852.00 Inc VAT
Excl Tax:
£710.00
17KG
450MM with
250MM length
200MM hight
The floor 884 comes with all parts shown
1 x floor 884 motor with 2m of 2 core cable attached
1 x bottom boss (spline collar / spline coupling )
2 x washers
2 x nuts 19mm
1 x manual release key size 6
1 x manual
If you need the Floor limit switch kit follow the link
https://www.gibidimotors.co.uk/store/product/floor-limit-switch-kit-floor-motors-aj01400-gibidi-1-x-...WHY NOT ADD A NEW FOUNDATION BOX WITH NEW LID AND BRONZE BUSHING WITH TOP BOSS
https://www.gibidimotors.co.uk/store/product/floor-830-824-880-850-854-884-foundation-box-aj49000
Unlike other hydraulic underground motors the oil is for the life of the Gibidi Floor underground motors and you don't have to change or top up the oil every 2 - 4 years! Like you DO with SEA & BFT hydraulic underground motors
No Such thing as a direct replacement for a Gibidi Floor motor That isn't Gibidi!
Have a look at how to replace an older floor 824 motor for the new motor follow link
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884
Gibidi Floor 884 BAC 24V 180° GROUND
allows practically invisible automation of swing gates The automated device consists of an
electromechanical underground operator in both 24 VDC and 230 VAC version, able to transmit
motion to leafs of up to 3.5 m
Same speed as the 824 so can be used as a replacement motor
Gibidi-floor 850-854-880-884
The new range has been designed with the aim of further improvements over the already high quality of previous models. Here you are the main improvements:
• Increased the size of the internal rack
• Double protection inserted around the transmission shaft
• New bronze guide ring for the transmission shaft
• Increased bearing robustness
• Inserted a thrust bearing on the transmission shaft
• New anchor system for the gearbox bushing
• New anchor system for the hydraulic power unit and the jack for greater resistance.
The new FLOOR are all compatible with the old FLOOR 824 series.
We recommend changing the bronze bearing and top boss when changing an old motor for a new motor
The correct bottom spline (bottom boss) comes with all new Floor motors from us (GiBiDi Coupling Splined )
https://www.gibidimotors.co.uk/store/product/boss-kit-for-all-floor-motors-inc-bearing-top-boss
MOTOR CONNECTION KIThttps://www.gibidimotors.co.uk/store/product/wiska-small-motor-replacement-connection-kit
6098400/5082000
