For 1 x Domino remote fob £22.06 Inc VAT Excl Tax: £18.38

(The more you buy the less you pay for each Gibidi Domino remote.

Click on the drop down menu.)

NEW LOW PRICE!

1 x £18.38 + vat = £22.06
2 x £35.93 + vat = £43.12
4 x £66.03 + vat =£79.24
6 x £97.30 + vat =£116.76
8 x £127.06 + vat =£152.48
10 x £150.50 + vat =£180.60
15 x £225.00 + vat = £270.00
20 x £298.33 + vat =£358.00
Box 40 £596.00 + vat =£715.20

**For 1 domino remote Use drop down for multi buy options **

https://www.gibidimotors.co.uk/store/product/a-gibidi-mako-black-or-white-remote-key-fob-433-mhz

Now we have new covers in white green and red CODE AU04000 follow link
https://www.gibidimotors.co.uk/store/product/gibidi-blister-accessory-set-of-3-coloured-covers-au040...

Domino transmitter Gibidi remote 4 button 4-Channel Transmitter ( 433Mhz )

TO PROGRAM THE REMOTE JUST GIVE US A CALL AND WE CAN TALK YOU THROUGH PROGRAMMING!!!

Dominates any type of system with the ease of a simple gesture that touches an object of high design. DOMINO is reliable and user-friendly with its ergonomic small (but not too small) buttons. You can attach it to your key ring or secure it in your car using the fastening system included in the blister pack.
With the nifty accessories you can personalise your remote control in your favourite colour, in fact, the covers are easily interchangeable in just a few seconds.
DOMINO: the modern way of using the most advanced safety devices.

GBD

4 -Channel transmitter rolling code in a blister pack
including key-ring AU03000
AU03000
AU04000
AU0300
AU0400

Follow link for programming Gibidi 433 video
https://vimeo.com/178172262
or
https://vimeo.com/180154676

GiBiDi Domino

Remote Transmitter Fob

Configuring Additional Remote Transmitter Fobs

Additional transmitter fobs can be configured to work with

the existing installation.

In order to do this you need to be standing in front of the control box

by the gates.

(A)

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds.

Then within five seconds...

Briefly press the button 1 on the new remote transmitter fob.

Leave the system for 10 seconds.

Press the button on the newly configured

transmitter fob and the gates should open.

Do not press the

Radio Transmitter Fob Button without seeing that the gate is

clear of obstructions.

OR (B)

To program a genuine Domino remote

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of

(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….

(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it

Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….

THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES…

If red L.E.D goes out press button again and repeat with other non-programmed remotes.

THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!

Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons

If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!

Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it!

Clearing the receiver card memory

(necessary if a handset has been lost or stolen)

Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time

and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again

Also by trying to program copy remotes this could stop genuine remotes from working

OR

Delete all other programmed remotes from the receiver unit

Regular Maintenance by User

The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you

should change your battery….

If you have problems you can give us a call at Gibidi automation on 01773 719347

We Stock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes

https://www.gibidimotors.co.uk/store/product/a-gibidi-mako-black-or-white-remote-key-fob-433-mhz
Call the office 01773 719347

165000/198000

Basket summary

REPUBLIC Of IRELAND CALL US IF YOU HAVE A VAT NUMBER FOR NETT PRICES OR

SEND US A LETTERHEAD WITH A VALID VAT NUMBER

Gibidi Receiver fob kit 1+5 rx kit KDRS1

Gibidi CAP-T868 CAPTIVE transmitter for external use 868MHz frequency

GIBIDI 2.0M CM200K8-NT Safety edge with NO TOUCH transmitter 868 MHz L= 2,0 m

A Gibidi Mako White AU03100 Remote Key Fob 433 MHz

2 X AU04500 Gibidi New Round 2 Button Remote Fob

A Gibidi 1 Way Stand Alone Receiver Unit DRS 4331 AU02540

A Gibidi Mako Black AU03150 Remote Key Fob 433 MHz

1 x Gibidi 2-Button Remote Fob AU01600

1 X Gibidi AU03000 1 x Domino Transmitter Gibidi Remote 4 Button