£117.60  Inc VAT Excl Tax: £98.00

230VAC 
Thank you for choosing Gl.BI.DI.
 NEW MULTI-BRAND 110VAC / 230VAC COMPATIBLE 2-CHANNEL RADIO RECEIVERS

We are pleased to inform you that the new 2-channel radio receivers with multi-brand code are now available, i.e. They can work with most variable or fixed code remote controls with 433MHz

PLEASE READ CAREFULLY THIS MANUAL BEFORE PROCEEDING WITH THE INSTALLATION.
DECLARATION BY THE UE MANUFACTURER: The manufacturer, Gi.Bi.Di. Sri, declares that the radio equipment complies with Directive

REMOTE CONTROL STORAGE: In order to put the receiver into remote control learning mode, push the button LEARN. The led LD1 turns on
(for 6 sec. max.). In this way, the buttons of the transmitters you are going to program will be assigned to CH1. If you push the LEARN button
again, the led LD1 will blink two times and the buttons of the transmitters you are going to program will be assigned to CH2. Push a button on
the remote control in order to program. LD1 blinks 3 times, indicating the correct storage. Without pushing LEARN again, it is possible to keep
storing more remote controls of the same type, one after the other, until the LD1 stays on. After the learning of the last remote control, you must
wait until LD1 turns off. Then the system is ready to work.
MEMORY RESET: If a mistake is made or if all the codes need to be deleted, press LEARN button (LD1 turns on) and hold it pressed down until
LD1 goes off again.
WARNING:
• It is possible to store more buttons of the same remote control, every button stored has a position in the memory.
• CONNECT THE ANTENNA TO THE TERMINALS ON THE RECEIVER

530000/636000