£816.00 Inc VAT Excl Tax: £680.00

18KG

 450MM with

 250MM length

 200MM hight

The floor 854 comes with all parts shown

1 x floor 854 motor with 2m of 2 core cable attached

1 x bottom boss (spline collar / spline coupling )

2 x washers

2 x nuts 19mm

1 x manual release key size 6

1 x manual

If you need the Floor limit switch kit follow the link

https://www.gibidimotors.co.uk/store/product/floor-limit-switch-kit-floor-motors-aj01400-gibidi-1-x-... 

WHY NOT ADD A NEW FOUNDATION BOX WITH NEW LID AND BRONZE BUSHING WITH TOP BOSS
https://www.gibidimotors.co.uk/store/product/floor-830-824-880-850-854-884-foundation-box-aj49000 

Unlike other hydraulic underground motors the oil is for the life of the Gibidi Floor underground motors and you don't have to change or top up the oil every 2 - 4 years! Like you DO with SEA & BFT hydraulic underground motors

No Such thing as a direct replacement for a Gibidi Floor motor That isn't Gibidi!

Have a look at how to replace an older floor 824 motor for the new motor follow link
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884

GIBIDI Floor 854 BAC 24V 150° slightly slower than floor 824/884 Look at Technical Data sheet!
But is a STRONGER motor & WILL DROP STRAIGHT INTO THE OLD FOUNDATION BOX WITHOUT ANY MODIFICATION NEEDED

Gibidi Floor 854 BAC 24V 150° GROUND
allows practically invisible automation of swing gates The automated device consists of an
electromechanical underground operator in both 24 VDC and 230 VAC version, able to transmit
motion to leafs of up to 3.5 m
Slight slower speed than the 824 / 884
Will go in a foundation box without alterations
Gibidi-floor 850-854-880-884

The new range has been designed with the aim of further improvements over the already high quality of previous models. Here you are the main improvements:

• Increased the size of the internal rack
• Double protection inserted around the transmission shaft
• New bronze guide ring for the transmission shaft
• Increased bearing robustness
• Inserted a thrust bearing on the transmission shaft
• New anchor system for the gearbox bushing
• New anchor system for the hydraulic power unit and the jack for greater resistance.

The new FLOOR are all compatible with the old FLOOR 824 series.

We recommend changing the bronze bearing and top boss when changing an old motor for a new motor
The correct bottom spline (bottom boss) comes with all new Floor motors from us (GiBiDi Coupling Splined )

https://www.gibidimotors.co.uk/store/product/boss-kit-for-all-floor-motors-inc-bearing-top-boss

MOTOR CONNECTION KIT
https://www.gibidimotors.co.uk/store/product/wiska-small-motor-replacement-connection-kit 

5060000/6072000