Payment
PAYMENT IS ACCEPTED VIA PAYPAL, DEBIT/CREDIT CARD
OR CALL US AND PAY VIA TELEPHONE
OR CALL US AND PAY VIA TELEPHONE
from 9 to 5
gibidi@gibidimotors.co.uk
Gibidi Floor 824 BAC Hydraulic Underground Motor (180 deg) 82400
£ 710.00
Only 5 remaining
£852.00 Inc VAT
Excl Tax:
£710.00
IF YOU ORDER THIS FLOOR 824 (180 DEG)
YOU WILL GET A FLOOR 884 (180 DEG)
The floor 884 comes with all parts shown
1 x floor 884 motor with 2m of 2 core cable attached
1 x bottom boss (spline collar / spline coupling )
2 x washers
2 x nuts 19mm
1 x manual release key size 6
1 x manual
If you need the Floor limit switch kit follow the link
https://www.gibidimotors.co.uk/store/product/floor-limit-switch-kit-floor-motors-aj01400-gibidi-1-x-...
OR MAYBE A FULL FOUNDATION BOX WITH LID
https://www.gibidimotors.co.uk/store/product/floor-830-824-880-850-854-884-foundation-box-aj49000
OR JUST THE NEW LID
https://www.gibidimotors.co.uk/store/product/floor-gibidi-810-812-824-830-new-motors-foundation-box-...
17KG
450MM with
250MM length
200MM hight
Gibidi Floor 824 BAC Hydraulic Underground Motor (180 deg) now replaced with Floor 884
These 24v units are the replacement motors for the K824/08/Z1 kit.
Unlike other hydraulic underground motors the oil is for the life of the Gibidi Floor underground motors and you don't have to change or top up the oil every 2 - 4 years! Like you DO with SEA & BFT hydraulic underground motors
No Such thing as a direct replacement for a Gibidi Floor motor That isn't Gibidi!
Have a look at how to replace an older floor 824 motor for the new motor follow link
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884
This product is the new hydraulic operator to replace the FLOOR 810 , FLOOR 812 and FLOOR 830. This will fit into all old foundation boxes however a small cut is required in the each of the 2 main back supports to accommodate the extra cylinder tie rods.
Changes include the following :
2 extra rack bushes for extra rack & pinion stability
2 extra tie rods per cylinder to retain cylinder heads
tempered steel drive shaft
hardened drive shaft collar
modified pistons
rotation increased to 180 degree with longer cylinders
This is a 24v motor so will need the Gibidi BA24 control panel
|
Underground hydraulic operator for swing gates
FLOOR, available either in
the 230Vac (FLOOR 830) or 24Vdc (FLOOR 824), is installed underground so
that it is invisible and does not alter the gate aesthetics. For every
model you have only one version that allows opening the leaf up to 180°.
The new GIBIDI technology allows making the operator reversible or irreversible with a little few manoeuvres.
The overpressure valves for force regulation during opening and closing,
and the 24Vdc technology, allow achieving the highest level of safety
against crushing, as required by the EN 12453 standards.
You can also adjust the opening and closing speed, and use the Hall effect limit switches (optional).
The unlocking device for emergency manoeuvres in the event of a blackout
is easy to access and can be used either on the inside or outside of
the gate.
The foundation box, with self-lubricating bushing is fully
self-supporting and allows installing the operator without having to
remove the leaf from the gate.
GIBIDI - Creative Automation
Call the office 01773 719347
We recommend changing the bronze bearing and top boss when changing an old motor for a new motor
The correct bottom spline (bottom boss) comes with all new Floor motors from us (GiBiDi Coupling Splined )
https://www.gibidimotors.co.uk/store/product/boss-kit-for-all-floor-motors-inc-bearing-top-boss
https://www.gibidimotors.co.uk/gibidi-floor-810-812-824-830-850-854-880-884MOTOR CONNECTION KIT
https://www.gibidimotors.co.uk/store/product/wiska-small-motor-replacement-connection-kit
6098400/5082000
