£36.00 Inc VAT  Excl Tax: £30.00

LESS THAN 1KG BAG

GIBIDI AU02910 GIBIDI 1 X PLUG IN 2 WAY RECEIVER UNIT 433 Mhz rolling code
 
All remotes include simplified step by step programming instructions

For GIBIDI 1 X PLUG IN 2 WAY RECEIVER UNIT Including memory chip To program press button on receiver then when red light is on press remote button 1 on remote ....That's it programmed !Will fit plus 2 control panels F3+, F4+, BA24, BA230, SC24, SC230 and many more .
Plug-in receiver ( 433Mhz ) 433 Mhz rolling code

AU02910 (2021)

How to unplug and plug in video
https://youtu.be/0S1xFBDwAZY

Managed Plug in Receiver With 2 Channels

Why not get some new fobs at the same time see links below

https://www.gibidimotors.co.uk/store/product/gibidi-upgrade-kit-5-gibidi-domino-au03000-fobs-au02910...

https://www.gibidimotors.co.uk/store/product/gibidi-upgrade-kit-5-gibidi-mako-au04200-fobs-au02910-plug-in-receiver

https://www.gibidimotors.co.uk/store/product/gibidi-upgrade-kit-au02910-plug-in-receiver-5-gibidi-giotto-au04500-fobs

Programming manual link below

https://www.gibidimotors.co.uk/old-and-new-receiver-units-inc-programming

Follow link for programming Gibidi 433 videos

https://vimeo.com/178172262
or
https://vimeo.com/180154676
or
https://youtu.be/A0sKbRAw_EY

GiBiDi  Domino

Remote Transmitter Fob

Configuring Additional Remote Transmitter Fobs

Additional transmitter fobs can be configured to work with

the existing installation.

In order to do this you need to be standing in front of the control box

by the gates.

(A)

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds.

Then within five seconds...

Briefly press the button 1 on the new remote transmitter fob.

Leave the system for 10 seconds.

Press the button on the newly configured

transmitter fob and the gates should open.

Do not press the

Radio Transmitter Fob Button without seeing that the gate is

clear of obstructions.

 

OR (B)

 

To program a genuine Domino remote

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of

 

(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….

 

(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it

 

Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….

 

THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES…

If red L.E.D goes out press button again and repeat with other non-programmed remotes.

 

THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!

 

Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons

If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!

 

Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it!

Clearing the receiver card memory

(necessary if a handset has been lost or stolen)

Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time

and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again

Also by trying to program copy remotes this could stop genuine remotes from working

OR

 Delete all other programmed remotes from the receiver unit

 

Regular Maintenance by User

The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you

should change your battery….

If you have problems you can give us a call at Gibidi automation on 08453510781

We Sock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes

      https://www.gibidimotors.co.uk/store/product/a-gibidi-mako-black-or-white-remote-key-fob-433-mhz

The Control Manuals For Gibidi 

As you scroll down you will find in order

OLD F4 PLUS CONTROL PANEL

NEW F4 PLUS CONTROL PANEL

***F4 CONTROL PANEL***
OLD AND NEW BA230 CONTROL PANEL
BA100 CONTROL PANEL
OLD AND NEW BA24 CONTROL PANEL
OLD AND NEW F12 CONTROL PANEL
BR24 CONTROL PANEL
OLD AND NEW BE24 CONTROL PANEL
PC200 CONTROL PANEL
SC230E CONTROL PANEL
OLD AND NEW SC230 CONTROL PANEL
NEW SE24 CONTROL PANEL
NEW SC24 CONTROL PANEL
OLD SC24 CONTROL PANEL
F3 PLUS CONTROL PANEL
PLUS 2A CONTROL PANEL
PLUS 2 CONTROL PANEL
PLUS 1 CONTROL PANEL
OLD AND NEW GARAGE DOOR CONTROLS
OLD AND NEW RECEIVER UNITS (INC PROGRAMMING)
PHOTOCELLS (INC HOW TO BYPASS)

ROLLER SHUTTER CONTROL PANEL

If you can't see what you are looking for just ask!

280500/336600