The Old Bake House Office

31 Moorgreen

Nottingham

NG162FD

United Kingdom

Basket: 0

Total: £ 0.00

A Gibidi AU03000 1 x Domino Transmitter Gibidi Remote 4 Button

£ 21.67

Gibidi AU03000 Domino Transmitter Gibidi Remote 4 Button

For 1 x Domino remote fob £26.00

Inc VAT & UK / Northern Ireland Signed For Postage

(Republic Of Ireland Postage Added At Checkout )

In Stock

Excl. Tax: £21.66    (The more you buy the less you pay for each Gibidi Domino remote..)
 

**For 1 domino remote Use drop down for multi buy options **

Domino transmitter gibidi remote 4 button 4-Channel Transmiter ( 433Mhz ) AU03000

TO PROGRAM THE REMOTE JUST GIVE US A CALL AND WE CAN TALK YOU THROUGH PROGRAMMING!!!

Dominates any type of system with the ease of a simple gesture that touches an object of high design. DOMINO is reliable and user-friendly with its ergonomic small (but not too small) buttons. You can attach it to your key ring or secure it in your car using the fastening system included in the blister pack.
With the nifty accessories you can personalise your remote control in your favourite colour, in fact, the covers are easily interchangeable in just a few seconds.
DOMINO: the modern way of using the most advanced safety devices.

GBD


4 -Channel transmitter rolling code in a blister pack
including key-ring AU03000


Folow link for programming gibidi 433 video
https://vimeo.com/178172262
or
https://vimeo.com/180154676

GiBiDi  Domino

Remote Transmitter Fob

Configuring Additional Remote Transmitter Fobs

Additional transmitter fobs can be configured to work with

the existing installation.

In order to do this you need to be standing in front of the control box

by the gates.

(A)

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...Press buttons 1 and 2 together at the same time for 8 continuous seconds.

Then within five seconds...

Briefly press the button 1 on the new remote transmitter fob.

Leave the system for 10 seconds.

Press the button on the newly configured

transmitter fob and the gates should open.

Do not press the

Radio Transmitter Fob Button without seeing that the gate is

clear of obstructions.

 

OR (B)

 

To program a genuine Domino remote

USING AN EXISTING WORKING GENUINE GIBIDI DOMINO TRANSMITTER FOB...You can do this by going to the control panel of

 

(1)Sliding gates Take the lid off the motor so you can see control panel and see through cover Then undo the screw by you at the end of the control panel by wiring then loosen the 2 screws at the far end away from the wiring to lever the see through lid up away from the wiring then at the far end away from the wiring there is a pcb card sticking up with a RED L.E.D and BUTTON by it ….

 

(2) Swing gates go to the control panel remove the lid and on right hand side ½ way up there is a PCB card sticking out with a RED L.E.D and BUTTON by it

 

Press button briefly until red L.E.D comes on then press ONLY BUTTON 1 on remote….

 

THAT’S IT PROGRAMMED! THEN REPEAT FOR MORE REMOTES…

If red L.E.D goes out press button again and repeat with other non-programmed remotes.

 

THIS PROGRAMS ALL 4 BUTTONS …. ONLY EVER PRESS BRIEFLY BUTTON 1 ON REMOTE FOR PROGRAMMING!

 

Don’t worry if you use buttons 2,3 or 4 as by pressing briefly button 1 this programmes all 4 buttons

If you have 2 button Gibidi remote follow the instructions but you can press the button you want to work the gates!

 

Don’t Press the receiver card button in for more than 5 seconds as this could delete all programmed remotes already programmed into it! 

Clearing the receiver card memory

(necessary if a handset has been lost or stolen)

Locate the programming button on the receiver/control PCB. Press this button briefly then press a second time

and hold it down until the L.E.D goes out then follow steps (A) or (b) above to re-program key fobs again 

Also by trying to program copy remotes this could stop genuine remotes from working

OR

 Delete all other programmed remotes from the receiver unit

 

Regular Maintenance by User

The Radio Transmitter Fob is battery powered. As the battery life diminishes, the range of transmission will decrease. When the red L.E.D. does not light up, you

should change your battery…. 

If you have problems you can give us a call at Gibidi automation on 08453510781

We Sock Spare Gibidi Parts & Full Gate Automation Kits Above Ground & Under Ground Motors For Swing Twin Leaf & Single Leaf Gates As Well As Sliding Gate Motors & Barrier / Bollard Motors of various sizes


Screen Shot 2018-03-30 at 234435pngScreen Shot 2018-04-02 at 023142png Mako Fob Soon
Call the office 01773 719347